Thank you for voting us Toronto's Best Plumbing Company for 2025!

Plumbing Tips & Guides

Expert advice from Advanced Plumbing & Drains

Plumbing Repairs & Installation

Backflow Testing in Toronto: Who Needs It and When

In Toronto, industrial, commercial, institutional and Part 3 residential properties, plus construction sites, must have a backflow prevention device, and testable devices must be tested when installed, within 72 hours of any repair or service, and at least once a year. Here is who that covers, what a test involves and what happens if a device fails.

Drains & Sewers

How Often Should Drains Be Cleaned? A Toronto Guide

Most Toronto homes do well with a professional main drain cleaning once a year, and sooner if you have had a root or grease blockage before. Kitchen, bath and laundry drains only need a plumber when they slow down. Here is a simple drain maintenance schedule for older Toronto houses, and the signs it is time to book.

Drains & Sewers

Sewer Gas Smell in Your House: Causes and Fixes

A sewer smell in the house usually comes from a dry drain trap, a missing cleanout plug, a failed toilet seal, a blocked vent or a cracked drain line. Refill unused drains first. If the smell comes back, a plumber can trace it, and a sewer camera inspection shows whether the drain line itself is damaged.

Plumbing Repairs & Installation

Toilet Repair or Replacement: How to Decide

Repair a toilet when the bowl and tank are sound and one part has failed, such as the flapper, fill valve or wax ring. Replace it when the porcelain is cracked, it clogs again and again, or it is an older high-volume model you keep fixing. Here is how to tell which one your Toronto home needs.

Basement Flooding Protection

Sump Pump Repair or Replacement: How to Decide

Repair a sump pump when the motor is sound and one part has failed, such as the float switch or check valve. Replace it when the motor is struggling, the pump is old and has never been serviced, or it cannot keep up with the water. Here is how to tell which one you need in a Toronto home, and how the City subsidy applies to a replacement.

Water Pipes & Leaks

Burst Pipe Repair in Toronto: What the Job Involves

Burst pipe repair means stopping the water, finding exactly where and why the pipe failed, cutting out the damaged section and replacing it, then testing the line under pressure. Here is what each step involves in a Toronto home, what changes the size of the job, and how to stop it happening again.

Drains & Sewers

Slow Draining Sink or Main Drain Clog? How to Tell

If one sink is slow, the clog is usually in that fixture's drain. If several drains are slow, or the basement floor drain backs up when you run water upstairs, the problem is in the main drain. Here is how to tell the difference in a Toronto home and what each fix involves.

Water Heaters & Water Quality

Water Heater Expansion Tank: Signs It Needs Replacing

A failed expansion tank lets pressure build every time your water heater heats, which shows up as a dripping relief valve, banging pipes and a tank that wears out early. Here are the signs, how to check, and what replacement involves in a Toronto home.

Water Heaters & Water Quality

Powered Anode Rod vs Magnesium Anode Rod: Which to Choose?

A magnesium anode rod protects your water heater by wearing away and has to be replaced. A powered anode rod protects it with a small electrical current and does not wear out. Here is how to choose for your Toronto home.